100-200kg/h small scale fish feed extruder,fish feed pellet feed production line

The small and medium-sized feed machine is formed by extruding the mixed powdered feed once. It does not need to add water during the granulation process, and does not need to be dried. After natural heating up to about 80 degrees, the starch can be gelatinized and the internal granules are matured deeply. Smooth surface, high hardness, long-term storage, ideal for raising rabbits, fish, chicken, pigs, sheep, cattle and small and medium-sized feed processing plants

Voltage: 220V
Cutting Power: 0.4kw
Feeding Power: 0.4kw
Max. Capacity: 50-150kg/h
Brand Name: LIMA MACHIENRY
Dimension(L*W*H): 1470*1100*1250

fish feed making machine is widely used for producing grains into high-grade aquatic feed pellets for fish, catfish, shrimps, crab, etc. Fish feed extruder machine also can make pet feed for dogs, cats, etc with different shapes and chicken feed. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours. According to your requirement and production scale, the fish feed extruder machine can be classified into dry type machines and wet type machines.

Good animal feed production line can get high quality feed pellet.
Mixing factor. Mixing is the most important part in feed production. If the mixing is not uniform, it will cause local concentration of nutrients will be too high or too low.

The indicator of mixing quality is mixing uniformity. The factors affecting the uniformity of mixing include following factors

1. Mixer types. Different types of mixers with different performances. At present, the better mixers are twin-shaft blade mixers, but they are more expensive.

2. Raw material properties. The powder size, adhesion, fluidity, bulk density, etc. of each component of the mixed material are different, which makes the material mixing uniformity quite different.

3. The order of feeding. For different formulations, the order of addition should be different. As a general rule, the components with large proportions are added to the mixer first, and then small amount or trace components are added, the components with small specific gravity are added to the mixer first, and the components with small powder size are added later.

The pellet can float over the water for 1-2hours, thus keeper can observe fish-eating situations;

2) Also the pellet is high-temperature puffing extruded, so the bacteria will be killed, which will keep the feed healthy and easy to digest.

3) Cheap cost, high efficiency, small occupied area, easy to operate and maintenance

4) The machine is only puffing extruder part, if you need frame and motor, we also can provide you. But recommend buying motor locally, easy to maintain and fix.

Fish feed, as the name suggests, is feed for fish. Its main components are composed of protein, fat, vitamins, and minerals.

Protein is an important nutrient for the survival of fish and shrimp, and an important constituent of cells, tissues, and organs of the body.

The pellet feed machine is specially designed for breeding professional households and their small farms, and can produce feeds such as pigs, cattle, sheep, rabbits, chickens, ducks and fish. The surface of the granules is smooth and clean, the hardness is moderate, dry and dry, easy to seal and store.

This animal feed pelleter can turn a lot of materials into grains, such as corn, weeds, straw, wood chips, peanut shells, minced meat dog food, etc., so it can be used in chicken farms, pig farms, cattle farms and other farms.

Weight: 40 KG
Voltage: 220v-380v
Power: 3-18.5kw
Application: Food Grinding
Core Components: Motor, Engine
Brand Name: LIMA MACHINERY
Dimension(L*W*H): 520-1060*400-1960*575-1370mm

Floating fish feed extruder machine is a kind of fish feed pellet machinery ,it is suitable for small and medium feed process factory and aquaculture farm. It can produce high-grade feed pellets which is suitable variety aquatic ,such as fish, catfish, crab, shrimps,cat,dog etc.Single screw extruder is much cheaper price and easy operation than twin screw extruder.

There is no need to heat outside the machine, through the screw extruding of the raw material, heat is produced and gathered during the rotary working process in the airtight environment, and during the high-temperature ripening process, the starch and fiber of the raw material become swell. Then under the pressure-tight condition, the material will be formed into pellets by shaping mold. In the end, through the high pressure produced by the regular rotating of the screw, after being cut by the forepart cutter which rotates regularly and high-speedily, the finished products will be shrunk and become small average puffed balls in room temperature and pressure.

Small Animal Pet Catfish Shrimp Food Feed Meal Making Extruder Floating/ Sinking Fish Feed Pellet Production Machine mainly proper for frog, aquatic, ornamental fish, pet feed farmers, pet feed, fish farmers, Small and Medium feed factory, institutes of scientific research and so on.
The raw materials can be wheat, soybean, cake, and other leftovers, etc. Its main work principle is changing mechanical energy into heat energy to extrude materia

Feed granule machine (also known as: granule feed machine, feed granule machine, granule feed molding machine), belongs to the feed granule equipment. It is a feed processing machine with corn, soybean meal, straw, grass and rice husk as raw materials and directly pressed into granules after grinding raw materials.

The pellet can float over the water for 1-2hours, thus keeper can observe fish-eating situations;

2) Also the pellet is high-temperature puffing extruded, so the bacteria will be killed, which will keep the feed healthy and easy to digest.

3) Cheap cost, high efficiency, small occupied area, easy to operate and maintenance

4) The machine is only puffing extruder part, if you need frame and motor, we also can provide you. But recommend buying motor locally, easy to maintain and fix.

Feed pellet machine is a hot-selling feed processing machine, It can be applied to various materials according to different animals and there are various models to choose from. Hope to provide you with high-quality machines and services

Feed granule machine (also known as: granule feed machine, feed granule machine, granule feed molding machine), belongs to the feed granule equipment. It is a feed processing machine with corn, soybean meal, straw, grass and rice husk as raw materials and directly pressed into granules after grinding raw materials.

1. This machine is applicable to frog farmers, fish farmer, pet feed farmer, small and medium feed mill factory, and research institution.
2. It is used to produce aquatic feed.

Floating fish feed pellet machine is widely used for producing high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc. It is can be used as a single production machine for a fish feed pellet producing,also can be used as key equipment in fish feed production line.It has become the ideal equipment for small and medium-sized fish farms and fish feed processing plants.
Manufactured fish feeds providing the balanced nutrition for farmed fish,it’s an important part of modern commercial aquaculture. Feed pellet meaning the form of granules or pellets which are made by fish feed pellet machine, it can provide the nutrition in a stable and concentrated form, enabling the fish to feed efficiently and grow to their full potential.

feed pellet making line is all-purpose for chicken,duck,cattle,cow,goat,sheep and fish feed production with 3-5 tons per hour capacity. This feed pellet production line has manual and automatic dosing system for your choice requiring that the raw mateial should be 100% grain for poultry or 70% grain and 30% fodder mixed together for livestock. This feed pellet line can manufacture the prime and healthy feed pellet for sale with professional design. This feed pellet processing line machinery is the perfect choice for commercial feed mill to realize low cost and high capacity .

The pellet feed machine is specially designed for breeding professional households and their small farms, and can produce feeds such as pigs, cattle, sheep, rabbits, chickens, ducks and fish. The surface of the granules is smooth and clean, the hardness is moderate, dry and dry, easy to seal and store.

Animal feed pellet mill is mainly used for small-scale production of animal and poultry feed pellets,driven by electric motor or diesel engine.
Animal feed pellet mill is mainly used for small-scale production of animal and poultry feed pellets, it’s popular in grain feed factory, farm, poultry farm,small size feed plant.The raw materials are easy to obtain in most place, like corn, maize, wheat bran, rice, beans, cassava, grass, stalk etc. Driven by electric motor makes it more energy-saving and environmental friendly, it can be used for diesel drive for the electric power shortage area. The animal feed pellet market is growing fast with recent years, feed pellet mill machine becomes more and more popular in breeding industry.

Fish feed machine is suitable to make dry and wet type fish food pellet (catfish, aquarium, Tilapia, Freshwater fish, and tropical fish, etc.)

Small Animal Pet Catfish Shrimp Food Feed Meal Making Extruder Floating/ Sinking Fish Feed Pellet Production Machine mainly proper for frog, aquatic, ornamental fish, pet feed farmers, pet feed, fish farmers, Small and Medium feed factory, institutes of scientific research and so on.

Floating fish feed extruder is widely used for producing variety materials into high-grade aquatic feed pellets for fish, catfish,shrimps, crab etc. The final products have unique shape and good taste, high nutrition and smooth textures. For feeds of fish and shrimp, the floating time in water can be adjusted by the extrusion degree adjustment. This dry type floating fish feed machine is an ideal for small and medium fish farm holders or feed processing plant.

Small Animal Pet Catfish Shrimp Food Feed Meal Making Extruder Floating/ Sinking Fish Feed Pellet Production Machine mainly proper for frog, aquatic, ornamental fish, pet feed farmers, pet feed, fish farmers, Small and Medium feed factory, institutes of scientific research and so on.
The raw materials can be wheat, soybean, cake, and other leftovers, etc. Its main work principle is changing mechanical energy into heat energy to extrude materia

Fish feed machine is suitable to make dry and wet type fish food pellet (catfish, aquarium, Tilapia, Freshwater fish, and tropical fish, etc.)

The whole line process is continuous and reasonable, and the performance of every single machine is good. The feed pellet production line has a compact structure, small floor space, low energy consumption and high efficiency. Size can be from 2mm to 10mm to be suitable for different animals such as cow, sheep, rabbits, pigs, chickens, ducks, fish shrimp, etc.
W can supply different capacity animal feed production line, such as 0.5-1t per hour, 2-4ton per hour, 5-6ton per hour, 8-10ton per hour 10-15ton per hour, 15-20ton per hour. We factory with strong technology team ,also can design as the customer is requirements.

Lima series cat litter pellet making machine is popular and applicable for processing cat litter pellets with pellet size: 1.5-10mm. It can be used to process cat litter pellets using bentonite, wood, wood fiber, bark, sawdust, wheat, corn, grass, alfalfa, peanut shells, citrus, biodegradable recycled paper, newspapers, recycled paper mill by-products, and biodegradable silica gel. It’s suitable for various small pet store with small scale capacity. Cat litter making machine had the industry standards, cost-effective, high efficiency and low maintenance .

Fats and oils provide a supply of energy and essential fatty acids. They are important for optimal health, including kidney function, reproduction and a glossy coat. There are 2 different types of essential fatty acids (EFAs) – omega. Some fats also supply a source of vitamins A, D, E, K.

Vitamins and Minerals Supplements in Dog Food Vitamins are responsible for promoting bone growth, blood clotting, energy production, and oxidant protection.

Vitamins A, D, E, and K require fat for absorption into the body, while vitamins such as the B-complex vitamins and vitamin C need water to be absorbed into the body.

Voltage: 220V/380V
Feeding power: 0.8kw
Dimension(L*W*H): 2550*2050*1650mm
Weight: 1900kg
Capacity: 700-800kg/h
Motor: 75KW
Cutting power: 0.8kw
Brand Name: LIMA MACHINERY