Maintain animal feed pellet machine
Nowadays, the structure of the feed pellet machine has been constantly updated. No matter how the structure is changed, the mold as a vulnerable part must always be replaced. And the expensive mold is also big cost in the production process of feed pellets. Whether it is properly maintained or not directly affects the service life of the mold, and therefore directly affects the processing cost of feed pellets. So how can we make the mold of the feed pellet machine last longer?
How to maintain animal feed pellet machine?
Here are several tips from Lima Pellet Machine
- Clean up the oil materials regularly
The oil materials is used to replace the raw materials in the mold hole after the end of production every day. If the mold is not used for more than one month, it is better to take out the oil materials from the mold, because the oil materials will gradually harden during the storage process for a long time, which will make it difficult to remove when working, it will affect the subsequent use of the mold seriously .
- Clean the mold if not use for a long time
If the mold and roller will not be used for a long time, it is better to remove the mold and clean it before storing. We are mainly clean the particles inside the mold and the raw materials attached to the surface of the mold. It can prevent the particles from hardening and difficult to remove due to long-term storage. also because the raw materials have water absorption, if the raw materials on the surface are not removed, the corrosion of the mold surface may be accelerated.
- The mold should be stored in a dry and ventilated place
Most of the molds of the feed pellet machine are made of alloy steel. If they are stored in a humid place for a long time, the surface of the mold may be damaged due to air corrosion, which greatly reduces its service life.
- Pay attention to handling process
The die of the feed pellet machine is a high-precision accessory. The mold holes are processed according to the compression ratio of the die carefully. If the worker are careless in the handling process, the structure of the inner wall of the die hole may be damaged, which may result in forming when processing the pellets. Low rate and short service life.
- Fill oil materials in the hole
The worker need use oil materials to grind for 5~10 minutes to ensure that all the oil materials is left in the die hole after the particles are processed every day. It will be good for the working in next day, also benefit the long-term use of the mold. The oil materials can be made by mixing engine oil and sawdust,which can be recycled.
According to these five tips to maintain the feed pellet machine, it will help your pellet machine last longer.
Anything about the fish feed machine price, you can leave a message.